Silicone emulsion HYXC-0368
Silicone emulsion HYXC-0368
?
?
?
(Aqueous emulsion of polydimethylsiloxane)
Technical data sheet
?
Product Description
HYXC-0368 emulsion is a nonionic polydimethylsiloxane emulsion with an active content of 60%. Because of its nonionic nature, it can be widely used in various systems, such as nonionic, anionic, cationic emulsification systems or without complex formation. The performance of HYXC-0368 emulsion is significantly better than that of similar products on the market. It has better stability when diluted to 20% solid content.
| characteristic? Ready-to-use nonionic emulsion ? Glossy and hydrophobic ? Good wetting and sliding properties ? Universal mold release agent ?Does not contain alkylphenol ethoxylates (APEO) ? Comply with detergent regulations(EC) No. 648/2004 ?existGood emulsion stability at 50℃ ? Good dilution stability, canDilute to2%. ?Good freeze-thaw stability (5 cycles). | application
Rubber or plastic parts (bottle stoppers, screw caps, barrel stoppers, etc.).
Extruded rubber parts; conveyor belts.
◆Spinning ◆Sewing thread lubrication ◆Knitwear manufacturing ◆Sewing needle lubrication ◆Glass cloth exhaust filter device. |
?
?
Typical physical properties
The following data is for reference only and may not be used directly to formulate specifications.
| Physical parameters | Indicator range |
| Exterior | Milky white liquid |
| Solid content(% W/W) | 62～66 |
| proportion | 1.0 |
| PH | 7.0～9.5 |
| Emulsifier type | Nonionic |
| diluent | water |
?
?
how to use
Used for stripping/ lubricant, HYXC-0368 emulsion can be used directly or diluted, and traditional spraying, dipping, rubbing or brushing can be used.Low hardness water should be used for dilution.For example, 1 part by mass of HYXC-0368 emulsion is diluted with 20 parts by mass of water, but users can do small-scale experiments based on the concentration required for use before production.HYXC-0368 emulsion can be used directly or diluted.As a textile finishing agent, the padding process can be used, the amount of emulsion used depends on the fabric structure and type (natural or synthetic).Under normal circumstances, the recommended concentrations are 6g/L and 25g/L.
?
| padding process1.Rinse the fabric thoroughly with a non-ionic detergent, then rinse with 2g/L 80% acetic acid solution for 5 minutes.This process can neutralize the alkali remaining in the previous process and avoid oil spots or roller sticking caused by unstable impregnation liquid. 2.If anti-grease resins or fillers are used in the process, the mixture should be diluted according to the manufacturer's recommendations. If the temperature is too high, the temperature should be reduced to below 30oC before padding the silicone emulsion. 3.Pre-dilute the HYXC-0368 emulsion with approximately the same mass of water and then add to the mixing tank as needed. 4.If you need to use a grease-resistant catalyst, please use the same quality of water to premix and add it to the mixing tank. 5.Dilute to desired volume with cold water. ? |
?
Pay attention when using
- Use clean mixing tanks, feed lines, roll boxes and rollers
- Use cold water to dilute lotion
- Do not use high shear mixing when preparing finishing solutions
The sample formula is for illustrative purposes only. Hongyuan New Materials does not guarantee whether it is suitable for commercial use, its efficacy, performance, or whether it infringes any patent rights.None of these formulas are commercial and have not been further tested. It is the user's responsibility to conduct complete experiments before use.
?
Validity and storage
HYXC-0368 emulsion will freeze, so please take care to avoid freezing. If freezing occurs, please thaw at room temperature before continued use.To prevent freezing, please store unopened within 5oC ~ 40oC. This product is valid for 12 months from the date of production.
?
Usage restrictions
This product has not been tested and is not expressly stated to be suitable for medical or pharmaceutical use.
?
Product safety information
This material does not include safety information required to use this product safely.Before handling, read the product and its safety data sheet and container label for information about the product's safe use, physical, environmental and health hazards.
?
?
Limited warranty information-Please read carefully
The information provided here is believed to be accurate and in good faith.However, since the conditions and methods of using our company's products are beyond our control, this information cannot replace the customer's efforts to ensure that Hongyuan New MaterialsHYXC-0368 products are tested to be safe, effective, and fully satisfactory for the specified end use.Suggestions for use shall not be construed as grounds for infringement of any patent rights.The only guarantee of Hongyuan New Materials is that the HYXC-0368 emulsion product meets the sales specifications at the time of shipment.If Hongyuan New Materials breaches this warranty, your only remedy is limited to a refund of the purchase price or the replacement of a product that does not conform to the warranty.
?
Hongyuan New Materials specifically declares that it does not make any other express or implied warranty of fitness for a particular purpose or merchantability.
Hongyuan New Materials declares that it will not be liable for any indirect or incidental damages.
?
?
?
